Category Archives: MESH

ARUBA NETWORKS 270 Series Outdoor Access Points

aruba-270-series-access-points,S-A-423514-13

Posted originally on July 7, 2014 By: John Busso, CISSP, ACMP, ITIL

Aruba AP270 Highlights

  • 802.11ac in 5.0 GHz band with up to 1.3 Gbps data rate
  • 802.11n   in 2.4 GHz band with up to 600 Mbps data rate
  • AP275 has an integrated MIMO Omnidirectional antennas
  • AP274 allows for external MIMO N-type antennas
  • Aesthetic design mimics common fixture for lighting/cameras
  • NEMA and IP-rated (IP66/67) for harsh environments
  • ClientMatch enabled to leverage 802.11k,r,and v standards
  • Flexibility for use as campus, remote or independent AP
  • 48VDC 802.3at-compliant or  100-240-Volt AC Power

I have been designing and implementing wireless networks since the ratification of 802.11 (yes prior to 802.11a or b).  I have seen many technologies come and go, such as WiFi using 900 MHz and Free Space Optics (FSO), which was essentially wireless using lasers as opposed to microwaves.  Aruba gets it right again improving on their existing outdoor wireless access point (see full product line here).  The AP270 series outdoor access point is a purpose-built, state-of-the-art device that will survive extreme conditions and anticipated wireless standards, making it “future-proof” for years to come.

To understand what makes the AP270 such a great WiFi access point we need to look at a few key factors: being future-proof, easy install and manage, flexible, and high-performing.

  • AP270 access points are future-proof because they are fortified against extreme weather and environmental contaminants.  The AP270 can operate between -40° F and  150° F.  It withstands humidity in a range of 5%-95%.  The access point can withstand up to 165 mph winds.  The Aruba 270 series AP is also future-proof because it uses the latest IEEE specification 802.11ac .
  • This outdoor access point is easy to install with only two mounting template one for wall-mounting and one for pole-mounting.  The mounting kits come in long and short depending on your specific application. Ethernet and serial console access makes configuring the AP270 easy and flexible.  The AP275 comes with integrated internal 3×3 MIMO antennas.  The AP274 can utilize any N-type antennas needed for your application .
  • Managing Aruba APs is easy and flexible because one can use the virtual controller resident on iAPs, controllers for campus and remote APs, or AirWave network management system for all of the above.
  • Aruba’s AP274/275 Access Points are high performing 802.11ac Access points that leverage several technologies.  Transmit Beam Forming is used for increased reliability in signal delivery.  Low Density Parity Check allows for high-efficiency error correction and increased throughput.  Maximal Rate Combining improves receiver performance.  Advanced Cellular Coexistence is employed to minimize interference from cellular systems.  To improve downlink RF performance the AP270 uses Cyclic Delay Diversity.

So to sum it up, Aruba’s AP274’s and AP275’s are good looking, easy to install, flexible, and high-performing.  Remember that they can be used as APs, iAPs or RAPs.  You can use the turnkey AP275 with its integrated antennas or select the AP274 when antenna tuning is desired.  Aruba offers all this at a list price of$1595 USD for the AP274.  For more information Click Here

ClarkKent

WiFi Superman’s alter ego